charcoal coconut Activated Carbon/alcohol filtering FREE BREW BAG THAT 2 LBS1 OZ

Description

with free non woven bag     FREE BREW BAG  WIT ORDER  ALLWAYS BETTER THEN OTHERS  . LOOK OVER SHINEONBEN STORE.   THIS IS THE CARBON  YOU WILL WANT TO HELP YOUR BREW.THE GOOD  STUFF!!!!   THATS 2LBS 1OZ THIS IS THE HEAVY ONE...
Activated carbon made from coconut shell is the best carbon for neutral alcohol production, but it is more difficult to prepare before you use it. When rinsed properly, coconut carbon often has 2-3 times the ability of other types of carbons. Brewhaus' Activated Coconut Carbon is made to be used for activated carbon filtration in order to produce a pure, neutral spirit such as vodka.
You must fully rinse your coconut carbon prior to use because if not properly rinsed, coconut carbon can actually REDUCE the distillate quality, leaving a white deposit in the alcohol. If you properly rinse the carbon by, Cleaning            the problem will disappear by itself. To be extra sure, you can first filter an extra 10 liters of water through the carbon bed before filtering your alcohol. For more detailed information on Activated Carbon,
read down for reviews   to bottom     !!!!!!!!!!
1.7L     2 LB 1 OZReviews                     free non woven bag  free      ..!!OK ??
.
DOUBLE the Effectiveness of Your Activated Carbon For Purification
That’s right, you can actually increase the purification effect of your activated carbon by 100%. The secret is to both heat and soak the carbon, and then to ensure that all air is expelled from the tube in your filter system. This way, the alcohol will flow through the carbon smoothly—instead of bypassing the carbon by flowing through the channels that form when using dry carbon. Plus, this method even enables you to filter twice the volume at a much faster rate.
Step 1: Saturate Activated Carbon with Hot Water.
Pour the activated carbon into an empty, stainless steel pot (a). Then add hot or boiling water; be sure to add at least twice as much water as there is activated carbon (b). Use a large spoon to stir the water and then let the carbon to sink to the bottom (c). Pour out the extra water (d). Repeat steps (a) through (d) 4 or 5 times in order to ensure that the carbon is completely saturated with water.
Step 2: Filter the Activated Carbon through the Filter System.
Assemble your filter unit (either plastic or stainless steel), ensuring that 2-3 filter papers are affixed to the bottom of the unit (a). Completely fill the tube of the unit with warm water; then pour the activated carbon into the warm water, ensuring that all air is expelled by tapping the tube to help settle and pack the carbon (b). Finally, pour 2-5 liters of water through the unit in order to flush out any remaining soluble substances (c).
Step 3: Filter your Alcohol.
As the last drops of water pass through the funnel at the top of the filter, pour in your alcohol (Step 3). Taste the filtered water/alcohol so you know when only the straight alcohol starts to pass through and let it run into a collection container. To prevent the alcohol from vaporizing, you can cover the funnel with a lid.
Step 4: Flush the Filter System with Water.
As the last drops of alcohol pass through the funnel at the top of the filter, pour in about a liter of water to flush it out and ensure that you’ve filtered all of the alcohol through (Step 4). You’ll want to taste the filtered water/alcohol again so you know when only the water is passing through and discard the water. It's important to ensure that the water has pushed out the alcohol so the alcohol doesn't remain in your carbon!        FREE BAG     FREE BAG
4
Activated Coconut Carbon- 1.7L
Posted by Rob McLaughlin on Oct 17th 2018
Worked Just as you said it would.. cleaning was long, but worth it.
5
Works Great
Posted by Chirodrdl on Jun 30th 2014
Good product.